diff --git a/cpu/mpc8260/commproc.c b/cpu/mpc8260/commproc.c
index c523ee4..72cceb3 100644
--- a/cpu/mpc8260/commproc.c
+++ b/cpu/mpc8260/commproc.c
@@ -111,9 +111,9 @@
  * to port numbers).  Documentation uses 1-based numbering.
  */
 #define BRG_INT_CLK	gd->brg_clk
-#define BRG_UART_CLK	((BRG_INT_CLK + 15) / 16)
+#define BRG_UART_CLK	(BRG_INT_CLK / 16)
 
-/* This function is used by UARTS, or anything else that uses a 16x
+/* This function is used by UARTs, or anything else that uses a 16x
  * oversampled clock.
  */
 void
@@ -123,9 +123,10 @@
 
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile uint	*bp;
+	uint cd = BRG_UART_CLK / rate;
 
-	/* This is good enough to get SMCs running.....
-	*/
+	if ((BRG_UART_CLK % rate) < (rate / 2))
+		cd--;
 	if (brg < 4) {
 		bp = (uint *)&immr->im_brgc1;
 	}
@@ -134,7 +135,7 @@
 		brg -= 4;
 	}
 	bp += brg;
-	*bp = (((((BRG_UART_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+	*bp = (cd << 1) | CPM_BRG_EN;
 }
 
 /* This function is used to set high speed synchronous baud rate
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index 7662fc6..2736702 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -22,7 +22,7 @@
  */
 
 /*
- * CPU specific code for the MPC8255 / MPC8260 CPUs
+ * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x
  *
  * written or collected and sometimes rewritten by
  * Magnus Damm <damm@bitsmart.com>
@@ -35,6 +35,9 @@
  *
  * added 8260 masks by
  * Marius Groeger <mag@sysgo.de>
+ *
+ * added HiP7 (8270/8275/8280) processors support by
+ * Yuli Barcohen <yuli@arabellasw.com>
  */
 
 #include <common.h>
@@ -56,15 +59,27 @@
 
 	puts ("CPU:   ");
 
-	if (((pvr >> 16) & 0xff) != 0x81)
+	switch (pvr) {
+	case PVR_8260:
+	case PVR_8260_HIP3:
+		k = 3;
+		break;
+	case PVR_8260_HIP4:
+		k = 4;
+		break;
+	case PVR_8260_HIP7:
+		k = 7;
+		break;
+	default:
 		return -1;	/* whoops! not an MPC8260 */
+	}
 	rev = pvr & 0xff;
 
 	immr = immap->im_memctl.memc_immr;
 	if ((immr & IMMR_ISB_MSK) != CFG_IMMR)
 		return -1;	/* whoops! someone moved the IMMR */
 
-	printf (CPU_ID_STR " (Rev %02x, Mask ", rev);
+	printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev);
 
 	/*
 	 * the bottom 16 bits of the immr are the Part Number and Mask Number
@@ -104,6 +119,12 @@
 	case 0x0062:
 		printf ("B.1 4K25A");
 		break;
+	case 0x0A00:
+		printf ("0.0 0K49M");
+		break;
+	case 0x0A01:
+		printf ("0.1 1K49M");
+		break;
 	default:
 		printf ("unknown [immr=0x%04x,k=0x%04x]", m, k);
 		break;
diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c
index 1f53c4f..6a3176a 100644
--- a/cpu/mpc8260/speed.c
+++ b/cpu/mpc8260/speed.c
@@ -120,15 +120,19 @@
 
 	scmr = immap->im_clkrst.car_scmr;
 	corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
-	busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
-	cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
-	plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
-	pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
-
 	cp = &corecnf_tab[corecnf];
 
-	gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
+	busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
+	cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
 
+	if (get_pvr () == PVR_8260_HIP7) { /* HiP7 */
+		pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT;
+		gd->vco_out = clkin * (pllmf + 1);
+	} else {                        /* HiP3, HiP4 */
+		pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
+		plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
+		gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
+	}
 #if 0
 	if (gd->vco_out / (busdf + 1) != clkin) {
 		/* aaarrrggghhh!!! */
diff --git a/cpu/mpc8xx/lcd.c b/cpu/mpc8xx/lcd.c
index 9f4b210..ec9fbfc 100644
--- a/cpu/mpc8xx/lcd.c
+++ b/cpu/mpc8xx/lcd.c
@@ -25,6 +25,8 @@
 /* ** HEADER FILES							*/
 /************************************************************************/
 
+/* #define DEBUG */
+
 #include <config.h>
 #include <common.h>
 #include <watchdog.h>
@@ -1057,6 +1059,23 @@
 	/* Now turn on LCD_ON */
 	immr->im_cpm.cp_pbdat |= 0x00001000;
 #endif
+#ifdef CONFIG_RRVISION
+	debug ("PC4->Output(1): enable LVDS\n");
+	debug ("PC5->Output(0): disable PAL clock\n");
+	immr->im_ioport.iop_pddir |=  0x1000;
+	immr->im_ioport.iop_pcpar &= ~(0x0C00);
+	immr->im_ioport.iop_pcdir |=   0x0C00 ;
+	immr->im_ioport.iop_pcdat |=   0x0800 ;
+	immr->im_ioport.iop_pcdat &= ~(0x0400);
+	debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
+	       immr->im_ioport.iop_pdpar,
+	       immr->im_ioport.iop_pddir,
+	       immr->im_ioport.iop_pddat);
+	debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
+	       immr->im_ioport.iop_pcpar,
+	       immr->im_ioport.iop_pcdir,
+	       immr->im_ioport.iop_pcdat);
+#endif
 }
 
 /*----------------------------------------------------------------------*/
diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c
index 40e65d3..1887cfe 100644
--- a/cpu/mpc8xx/video.c
+++ b/cpu/mpc8xx/video.c
@@ -23,7 +23,7 @@
  * MA 02111-1307 USA
  */
 
-/* #define	DEBUG */
+/* #define DEBUG */
 
 /************************************************************************/
 /* ** HEADER FILES							*/
@@ -86,6 +86,14 @@
 #define VIDEO_I2C_ADDR		CONFIG_VIDEO_ENCODER_AD7177_ADDR
 #endif
 
+#ifdef CONFIG_VIDEO_ENCODER_AD7179
+
+#include <video_ad7179.h>	/* Sets encoder data, mode, and visible and active area */
+
+#define VIDEO_I2C		1
+#define VIDEO_I2C_ADDR		CONFIG_VIDEO_ENCODER_AD7179_ADDR
+#endif
+
 /************************************************************************/
 /* ** VIDEO MODE CONSTANTS						*/
 /************************************************************************/
@@ -155,7 +163,7 @@
 /* ** CONSOLE CONSTANTS							*/
 /************************************************************************/
 
-#ifdef 	CONFIG_VIDEO_LOGO
+#ifdef	CONFIG_VIDEO_LOGO
 #define CONSOLE_ROWS		((VIDEO_ROWS - VIDEO_LOGO_HEIGHT) / VIDEO_FONT_HEIGHT)
 #define VIDEO_LOGO_SKIP		(VIDEO_COLS - VIDEO_LOGO_WIDTH)
 #else
@@ -163,11 +171,11 @@
 #endif
 
 #define CONSOLE_COLS		(VIDEO_COLS / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE 	(VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
+#define CONSOLE_ROW_SIZE	(VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
 #define CONSOLE_ROW_FIRST	(video_console_address)
-#define CONSOLE_ROW_SECOND 	(video_console_address + CONSOLE_ROW_SIZE)
+#define CONSOLE_ROW_SECOND	(video_console_address + CONSOLE_ROW_SIZE)
 #define CONSOLE_ROW_LAST	(video_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE 		(CONSOLE_ROW_SIZE * CONSOLE_ROWS)
+#define CONSOLE_SIZE		(CONSOLE_ROW_SIZE * CONSOLE_ROWS)
 #define CONSOLE_SCROLL_SIZE	(CONSOLE_SIZE - CONSOLE_ROW_SIZE)
 
 /*
@@ -287,8 +295,8 @@
 	/* Calculate YUV values (0-255) from RGB beetween 0-100 */
 
 	YUYV.Y1 = YUYV.Y2 = 209 * (pR + pG + pB) / 300 + 16;
-	YUYV.U  = pR - (pG * 3 / 4) - (pB / 4) + 128;
-	YUYV.V  = pB - (pR / 4) - (pG * 3 / 4) + 128;
+	YUYV.U	= pR - (pG * 3 / 4) - (pB / 4) + 128;
+	YUYV.V	= pB - (pR / 4) - (pG * 3 / 4) + 128;
 	return *ret;
 #endif
 #ifdef VIDEO_MODE_RGB
@@ -473,6 +481,7 @@
 /* ** VIDEO CONTROLLER LOW-LEVEL FUNCTIONS				*/
 /************************************************************************/
 
+#if !defined(CONFIG_RRVISION)
 static void video_mode_dupefield (VRAM * source, VRAM * dest, int entries)
 {
 	int i;
@@ -485,6 +494,7 @@
 	dest[0].lcyc++;			/* Add a cycle to the first entry */
 	dest[entries - 1].lst = 1;	/* Set end of ram entries */
 }
+#endif
 
 static void inline video_mode_addentry (VRAM * vr,
 	int Hx, int Vx, int Fx, int Bx,
@@ -501,7 +511,7 @@
 	vr->lst = LST;
 }
 
-#define ADDENTRY(a,b,c,d,e,f,g,h,i) 	video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
+#define ADDENTRY(a,b,c,d,e,f,g,h,i)	video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
 
 static int video_mode_generate (void)
 {
@@ -539,9 +549,12 @@
 	Y1 = video_panning_value_y & 0xfffe;
 	Y2 = DY - Y1;
 
+	debug("X1=%d, X2=%d, Y1=%d, Y2=%d, DX=%d, DY=%d VIDEO_COLS=%d \n",
+	      X1, X2, Y1, Y2, DX, DY, VIDEO_COLS);
+
 #ifdef VIDEO_MODE_NTSC
 /*
- *           Hx Vx Fx Bx VDS INT LCYC LP LST
+ *	     Hx Vx Fx Bx VDS INT LCYC LP LST
  *
  * Retrace blanking
  */
@@ -641,6 +654,73 @@
 #endif
 
 #ifdef VIDEO_MODE_PAL
+
+#if defined(CONFIG_RRVISION)
+
+#define HPW   160  /* horizontal pulse width (was 139)	*/
+#define VPW	2  /* vertical pulse width		*/
+#define HBP   104  /* horizontal back porch (was 112)	*/
+#define VBP    19  /* vertical back porch (was 19)	*/
+#define VID_R 240  /* number of rows			*/
+
+	debug ("[VIDEO CTRL] Starting to add controller entries...");
+/*
+ * Even field
+ */
+	ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
+	ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
+	ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
+
+	ADDENTRY (0, 0, 0, 3, 1, 0, VPW, 1, 0);
+	ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
+	ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+
+	ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
+	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+	ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+/*
+ * Active area
+ */
+	ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
+	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+	ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
+	ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0); 
+	ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
+
+	ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
+	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+	ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
+/* 
+ * Odd field	
+ */	
+	ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
+	ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
+	ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
+
+	ADDENTRY (0, 0, 0, 3, 1, 0, VPW+1, 1, 0);
+	ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
+	ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+
+	ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
+	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+	ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+/*
+ * Active area
+ */
+	ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
+	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+	ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
+	ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0); 
+	ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
+
+	ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
+	ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+	ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
+
+	debug ("done\n");
+
+#else  /* !CONFIG_RRVISION */
+
 /*
  *	Hx Vx Fx Bx VDS INT LCYC LP LST
  *
@@ -692,7 +772,9 @@
  * one more cycle loop and a last identifier)
  */
 	video_mode_dupefield (vr, &vr[entry], entry);
-#endif
+#endif /* CONFIG_RRVISION */
+
+#endif /* VIDEO_MODE_PAL */
 
 	/* See what FIFO are we using */
 	fifo = GETBIT (immap->im_vid.vid_vsr, VIDEO_VSR_CAS);
@@ -829,26 +911,19 @@
 	debug ("[VIDEO CTRL] Turning on video port led...\n");
 	SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 0);
 #endif
-
 #ifdef CONFIG_RRVISION
-	/* enable clock: set PD3 to VCLK, PC5 to HIGH */
-	{
-		volatile immap_t *immr = (immap_t *) CFG_IMMR;
-
-		debug ("PDPAR=%04X PDDIR=%04X PDDAT=%04X\n",
-			immr->im_ioport.iop_pdpar,
-			immr->im_ioport.iop_pddir,
-			immr->im_ioport.iop_pddat);
-
-		debug ("[RRvision] PC5 -> Output (1): ");
-		immr->im_ioport.iop_pcpar &= ~(0x0400);
-		immr->im_ioport.iop_pcdir |=   0x0400 ;
-		immr->im_ioport.iop_pcdat |=   0x0400 ;
-		debug ("PCPAR=%04X PCDIR=%04X PCDAT=%04X\n",
-			immr->im_ioport.iop_pcpar,
-			immr->im_ioport.iop_pcdir,
-			immr->im_ioport.iop_pcdat);
-	}
+	debug ("PC5->Output(1): enable PAL clock");
+	immap->im_ioport.iop_pcpar &= ~(0x0400);
+	immap->im_ioport.iop_pcdir |=   0x0400 ;
+	immap->im_ioport.iop_pcdat |=   0x0400 ;
+	debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
+	       immap->im_ioport.iop_pdpar,
+	       immap->im_ioport.iop_pddir,
+	       immap->im_ioport.iop_pddat);
+	debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
+	       immap->im_ioport.iop_pcpar,
+	       immap->im_ioport.iop_pcdir,
+	       immap->im_ioport.iop_pcdat);
 #endif	/* CONFIG_RRVISION */
 
 	/* Blanking the screen. */